Thursday, August 22, 2013

Smartphone holder made from driftwood - Όρθια θήκη για κινητό από ξύλα της θάλασσας

During my summer holidays I had enough spare time to spend on a practical thing I wanted to have. It's been some time since I bought a new android smartphone and I wanted a holder for it so that I will be able to see easily phone calls or other notifications. So I came up with the idea of making it on my own, of course by using my favourite driftwood.

Κατά τη διάρκεια των καλοκαιρινών μου διακοπών είχα ελεύθερο χρόνο για να φτιάξω κάτι πρακτικό που ήθελα να έχω. Εδώ και καιρό αγόρασα ένα νέο κινητό android και ήθελα μια όρθια θήκη για να το στηρίζω ώστε να βλέπω κατευθείαν τηλεφωνήματα ή άλλες ειδοποιήσεις. Κι έτσι μου ήρθε η ιδέα να το φτιάξω μόνος μου, φυσικά με τα αγαπημένα μου ξύλα της θάλασσας!.


It took me quite a time to decide on the design of the holder, as well as to search through the pile of my driftwood for the right candidates. Fortunately Ι found a piece of driftwood which ended up with two legs. So Ι glued a third piece of driftwood to it and I was able to make a tripod, which was to be used as a foundation for my holder.

Μου πήρε αρκετό χρόνο μέχρι να αποφασίσω πώς θα μοιάζει αλλά και αρκετό ψάξιμο στο σωρό με τα γυαλόξυλα μου μέχρι να βρώ τα κατάλληλα ξυλάκια. Eυτυχώς βρήκα ένα γυαλόξύλο που κατέληγε σε δύο ποδαράκια. Έτσι προσθέτοντας κι ακόμη ένα ξυλαράκι έφτιαξα ένα τρίποδο, που χρησίμεψε σαν βάση για τη θήκη μου.


For making the back of the holder I found several small pieces of driftwood. I cut them off to the same length and glued them together one next to the other. Then I glued some small pieces of driftwood at the sides and below of it so that the smartphone will fit easily.

Σαν πλάτη βρήκα μικρά ξυλαράκια και κόβοντας τα στο ίδιο μήκος τα κόλλησα μαζί το ένα δίπλα στο άλλο. Έπειτα κόλλησα μερικά ξυλάκια στα πλάγια και από κάτω για να μπορεί να κάθεται το κινητό.


Finally I glued the back of the holder to the foundation I made before and the result is the following:

Στο τέλος κόλλησα την πλάτη πάνω στη βάση που έφτιαξα πριν και το αποτέλεσμα είνα το εξής:



It may look that the smartphone is high up but I made it this way on purpose. When I plug in the wire to charge up the smartphone or to transfer files, then the holder allows it to fit nicely:

Μπορεί να δείχνει ότι το κινητό είναι αρκετά ψηλά αλλά αυτό έγινε σκόπιμα. Όταν συνδέω το καλώδιο για να φορτίσω το κινητό ή να μεταφέρω αρχεία, τότε η όρθια θήκη επιτρέπει στο καλώδιο να κάθεται άνετα:



It looks nice and practical, isn't it?

Δεν είναι ωραίο και πρακτικό;


Related Posts Plugin for WordPress, Blogger...